Polybutylene Plumbing Problems - Lawsuit and Settlement

If you have Polybutylene plumbing in your home, time to file a claim is running out.

Polybutylene is a semi-flexible plastic plumbing installed in homes since the late '70s.

It has had a much higher then average rate of failure leading to lawsuits. Shell Oil had settled for more the $1 billion while not admitting any legal liability. This settlement may applies to more then 6 million homes with the faulty plumbing. The time line for inclusion in the settlement is running out, and you must file a claim with in 17 years of installation and before May 1st, 2009.

Read more about this settlement and qualifying for payments here.

Polybutylene plumbing was installed in homes and as the supply from the water company. It was not used for drains or vents. In homes it is usually a gray (some are silver or black) with plastic or metal inserted fittings.

These fittings are clamped with metal crimp rings over the outside the pipe, usually made of brass, copper or aluminum. It is these inserted fittings to pipe connections that most often fail.

PVC, CPVC PEX and Aquapex are other forms of plastic pipes that are not a part of this settlement, and have much higher reliability.

If a manufactured home has had it's polybutylene pipes replaced in Washington State, you may find this tag on the end of the building from the Department of Labor and Industries.

If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites

 

Recovering after a flood

A flood can cause a lot of damage to homes and their contents. Wells are also vulnerable to flood damage too. With the recent floods in our area, we have put together several articles to help keep you and your family safe.

Wells:

If surface water makes it into a well it can often cause serious health problems. There are many sources of contamination of flood waters and frequently contain bactria, protozoa, and viruses ( E.coli, Giardia and hepatitis for example). If your well is flooded or you notice changes in taste, color or smell of your water, it is recommended that you immediately start boiling it when you use it for drinking, cooking, brushing your teeth and cleaning any wounds. The water should be brought to a vigorous rolling boil for at least 1 minute to assure all pathogens are killed.

The well and plumbing system must be disinfected. This includes all filters, pressure regulating tanks, water heaters, water softeners and supply lines. The recommended procedure for water supply system decontamination is detailed here: http://www.hipspro.com/pubs/flooding_well-decontamination.pdf

The only sure way to verify that well water is safe is to have it tested. Chlorine is effective against harmful organisms, but floods can also contain dangerous chemicals. Your local health department can give you instructions on properly testing your water.

Crawlspaces:

Water in walls crawl spaces and attics will lead to serious problems with structural pests, such as carpenter ants, moisture ants, termites and wood boring beetles. In the northwest, all common structural pests are dependent on high water content, so the most important thing is remove the saturated materials as soon as possible and strong ventilation to dry it out. Crawlspaces must be pumped out as soon as possible, and we recommend using a fan inside to keep the air moving (this will help dry it out). A 2nd fan should be used to pull the damp air out of the space. Do not blow air into the crawlspace, this will force water vapor and odor into the rest of the home. Install it at the crawlspace opening or at a vent. Assure that the vents are clear of debris and if the access hatch is open, cover it with a stiff wire screen to keep animals out of the space. Read more tips here: http://www.hipspro.com/pubs/floodmoisture.pdf

Carpets:

Usually carpets and rugs must be thrown away with few specific exceptions. If the flooding is from clean water, as in the case of a frozen supply lines or rain water are easier to treat then the gray or black water contamination. Gray water problems include dishwashers, washing machines, punctured waterbeds, or broken aquariums. Black water is the most contaminated with organisms capable of producing disease. Common sources of this contamination are flooding from seawater, rivers, or streams. If left untreated for more then 48 hours, gray water can turn into black water and the clean up is much harder.

Remove and dispose of carpet saturated with “black water”. Always remove and dispose of carpet padding saturated with “gray” or “black water”. Carpet padding can be restored if it has been wet from clean water less than 48 hours and only part of the padding in a room is wet. Read the rest of these guidelines here: http://www.hipspro.com/pubs/rugs.pdf

Furniture:

Wood furniture comes in many grades and materials. Most antiques are made with solid wood and can often be saved. Furniture that is made with particle board of MDF (medium density fiberboard) get ruined very quickly. The extent of the damage, cost of replacement and cost of restoration help determine if an article should be saved. The most important thing is to dry it out as soon as possible since minor damage can become severe in just a few days and making salvage impossible. Read tips on saving furniture here: http://www.hipspro.com/pubs/furniture.pdf

If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites

 

Home energy savings tips

Saving energy in your home will not only save you money, but will also help the environment by reducing the need for hydro-electric dams and fossil fuels used to produce electricity. These steps will pay for themselves again and again for years to come.

The average home looses up to 20% of its heating due to drafts. Doors, windows, outlets, and switches are all common areas of heat loss. Most heating bills in our area can be $2000 a season or more meaning those drafts can cost you $400 a year! That buys a lot of weather stripping and caulking. Most doors and windows are easy to check with just your hand, if you feel the cold air coming in then you are loosing heat. Outlets and switches also can be drafty, if you feel cool air around them, consider foam gaskets under the cover plates. Old single pane windows can be made more efficient by installing storm windows or inside magnetic panels to reduce drafts. Read more on caulk and weather stripping here.

During the day, let the sunlight in to reduce lighting costs, but at sunset, closing curtains will also help reduce heat loss. Consider cellular blinds as they are more energy efficient then blinds and shutters.

Turning down your thermostat by one degree can save over 5 percent on your heating bill. Consider electronic thermostats with built in timers to reduce energy use when you are at work or sleeping. You can still awaken to a warm house and not use energy when you don't need to. Avoid heating rooms you don't use by closing heat vents or turning down individual room thermostats.

Have your heating system checked regularly to assure that it is running at top efficiency, and always keep air filters clean. A tiny change in a furnace or boiler systems combustion can dramatically lower your heating bills and will often pay for the service call in energy savings.

Water heaters use a lot of energy and should have the thermostats set to 120 degrees. Not only will this save energy, but dramatically reduces the risk of scalding injuries. If it is set higher, you will be using a lot of cold water to bring the temperature down. Gas how water heaters have their thermostat on the exterior and are easy to set, electric heaters are under cover and should be set by a professional. Read more about energy efficient water heating here.

Take showers instead of filling a bath and save about 50% of the energy. Low flow shower heads save both water and energy. If you have a hot tub, make sure the cavity under the tub is insulated and you use a insulated cover. Turn down the heat when you are not going to use it for an extended time.

Lighting is one of the easiest ways to save energy and money. Compact florescent lights (CFLs) are direct replacements for standard incandescent light bulbs. The 100 watt equivalent lights can last 13 times longer and use less then 1/4th the energy. When you buy and install a 6 pack of CFLs, it is like putting $550 in your pocket! They have styles now for replacing bathroom globes and outdoor flood lights. But remember they can't be used with dimmers, and must be disposed of properly. Most hardware stores will take the old lights back.

Computers use significant energy, especially those that are left on all the time. Remember a screensaver saves no energy, but hibernation does, or better yet power them off and save more. Modern LCD displays use 1/3 the energy then a old CRT. Same with most laptops, they are more energy efficient then a standard desktop.

TV's use power all the time, even when they are turned 'off'. Most entertainment devices with remotes (DVD players, VCRs, stereo equipment also use power in standby mode. Unplugging them when you are not using them will save energy.

Keep freezers free from excessive ice buildup. A defrosted freezer is more efficient. Open the doors a minimum amount of time to keep the cold inside. Every time a refrigerator door is opened, the compressor had to re-chill the contents.

Laundry is another big power user, so wash full loads. Use the coolest water temperature that will do the job, and always rinse with cold water. The washing machine itself doesn't use nearly the energy as the water heater does to wash in warm or hot water. The clothes dryer is one of the highest energy use appliance in most homes. Use a clothes line and you will save significant energy.

Look for the "Energy Star" label on all household appliances, and buy the ones with the lowest energy use.

Home without adequate insulation should upgraded. The first place is in the attic, it is cheap and easy to add. The payback in energy savings is very fast since 1/3rd of heat lost is through the roof. If you walls are un-insulated we recommend adding it there too. It will pay you back for as long as you own the home and increase the re-sale value.

Examples of Where to Insulate

1. In unfinished attic spaces, insulate between and over the floor joists to seal off living spaces below.
1A attic access door
2. In finished attic rooms with or without dormer,
insulate …
2A between the studs of "knee" walls;
2B between the studs and rafters of exterior walls and roof;
2C ceilings with cold spaces above;
2D extend insulation into joist space to reduce air flows.
3. All exterior walls, including …
3A walls between living spaces and unheated garages, shed roofs, or storage areas;
3B foundation walls above ground level;
3C foundation walls in heated basements, full wall either interior or exterior.
4. Floors above cold spaces, such as vented craw spaces and unheated garages. Also insulate …
4A any portion of the floor in a room that is cantilevered beyond the exterior wall below;
4B slab floors built directly on the ground;
4C as an alternative to floor insulation, foundation walls of un-vented crawl spaces;
4D extend insulation into joist space to reduce air flows.
5. Band joists.
6. Replacement or storm windows and caulk and seal around all windows and doors.

If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites

 

Outdoor electrical safety tips for holiday lighting

Holiday lighting is a wonderful tradition, and these tips will help to keep you and your family safe.

Use care not to overload your circuits. Do not run too many strings together, the amount of lights on string that can safely be connected differs for each type of light. Read and follow the manufacturer's recommendations. Carefully inspect each string for frayed insulation, loose connections or broken bulbs. Never plug in a string that has bulbs broken open, as the interior filament is a electrocution hazard. Only use lights outdoors that are approved for outdoor use.

Use timers to control your lighting to save more energy. This chart dramatically contrasts the old style bulbs with modern LCD technology lighting using as little as 1.15% of the energy of the old style lighting.

Another consideration is heat. Never install old style bulbs on a real tree. Think of string of 100, 10 watt lights, that is 1000 watts light and heat. You would never put a 1000 watt heater on a tree for obvious reasons, and these strings are nearly the equivalent of doing just that.

Be careful when hanging lights. Loose wiring is more easily damaged by movement from trees and wind. Never use standard staples, as they can cut into insulation and cause a short or shock hazard. Best to use insulated clips to hang lighting.

GFCI protected outlets are recommended for all outdoor electrical use. They dramatically reduce the risk of electrical shocks and electrocutions.

Use only UL approved exterior grade power cords outside with proper ground (3 prong connector). Never run cords through doorways, windows where they could get damaged or be a trip hazard. Keep all plugs and connectors off the ground, away from puddles and snow.

If you blow fuses or trip breakers, reduce the load on that circuit. Never change the amperage if a blown fuse, if a 15 amp fuse blows, reduce the load on that circuit and replace with the exact same type 15 amp fuse. The wiring in the home is designed to only carry the current of the fuse. That blown fuse likely prevented the wiring from overheating and possible fire.

If you see flickering lights, sparks, warm switches, plugs, or outlets, or dimming lights, there is a potential dangerous problem that could cause an electrical fire.

As always use extreme care on ladders, make sure they have a good footing and are steady. Never touch your exterior power drop! Any contact with a poorly insulated drop will kill you, an aluminum ladder is an excellent electrical conductor.

Read more about holiday lighting safety here from Washington State University Extension Energy Program and the Northwest Energy Efficiency Alliance.

If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites

 

Getting Your Home Ready For Winter

With winter on its way a few routine steps will help keep you warm and comfortable, and save you money.

If you have an oil furnace, have it checked annually. A very small adjustment can make a huge difference in your heating bill, not to mention reducing the pollution from poorly adjusted burners. By the way, with oil prices at unusually low prices, it might be a good time to fill up the tank before these prices go back up.

Gas furnaces should be checked regularly too. Our recommendations is to have the 1st service at 5 years, again at 10, then every year thereafter. Be sure to keep up on changing your furnace filters. If you have a electric fan forced wall unit (like a cadet) be sure to properly clean them. We have a copy of the instructions here.

Chimneys, If you heat with wood, have your flue swept and checked every year. Examine wood stoves for cracked or missing fire bricks, poor door seals, and loose or damaged flue pipes.

All non frost free hose bibs should be insulated to protect them from freezing. Be sure to disconnect hoses! A hose will cause a frost free hose bib to freeze when the water in the hose freezes.

Clean gutters and check the downspouts assuring that they discharge away from the building, the further the better

Look at all trees, and other plants. They should be trimmed back so they cant touch the home. Any contact is a natural path for insects, rodents, and can contribute to structural pests.

Walk around your home and look at the bottom row of siding. Ideally there should be 6 inches of concrete below the bottom row of siding. If soil or bark is piled too high there is a much greater chance of problems with termites ants or beetles damaging the home.

Look at every window and door. Check weather stripping, repair as necessary. Look at every threshold and door sweep, if there are gaps, you will be loosing heat. Caulk all gaps in siding, trim, utility holes, etc.

If it is safe to do so, remove any leaves and other debris from the roof. Use great care to not remove the granules on a aspalt roof. (DO NOT PRESSURE WASH) Ideally on a dry day, carefully use a leaf blower, debris in valleys and behind chimney's can cause water to back up and cause leaks.

Check your smoke detectors. If you have an attached garage, live in multi-family, or have gas, oil or wood burning appliances, you must have a carbon monoxide detector!! All homes should have them, since there is no way to tell if you have a problem with CO. Most people never know they have a problem untill someone is make sick or they are killed. Take any warning from a carbon monoxide detector very seriously, and call the fire department.

If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites

 

Is your deck safe?

There have been 800 injuries and 20 deaths in the last 10 years directly connected to unsafe decks and collapses. We are not only trained home inspectors, but as builders of decks, we understand the importance of proper deck construction.

We see substandard decks all the time, with dangerous railings, improper attachments, missing joist hangers and poorly built stairs. Safety rails on decks should be 36" high and have no openings greater then 4". The building codes for these rails have changes dramatically over the years. When I first started building decks, the pickets could be spaced up to 9" apart. This can pose a significant hazard for children, so older decks should be retrofitted with proper railings. All handrails along stair cases should between 30" and 34" above the stair nose and on at least one side of the side of close stair openings or both sides of open stairs.

The today show did a report on deck safety. See the video here



Make sure you deck is thoroughly inspected, your life may depend on it!

If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites

Window Fall Hazards

Always keep small children away from open windows Every summer there are a spike of fall injuries of children when we open windows up to let fresh air in. Window screens have warnings on then informing consumers that the they are not to be considered fall safety devices. Most screens will come dislodged or tear with only moderate pressure. The view and fresh air are very appealing to young children. The Consumer Product Safety Commission estimates that there have been 3200 children treated in hospitals and 25 deaths in the last year from window falls. These accidents are easy to prevent. All windows should have safety stops or barriers to prevent children from falling out of windows. These should be easily removable by older kids and adults in case of fire. Any window that opens and children have access to should be considered a falling hazard. No window that is accessible to children should open more then 4". Many parents make the faulty assumption that a window screen will prevent this kind of accident. Where a window can be opened from the top and bottom, always open only the top. It is much safer to open the top of a double hung window. Never keep furniture near a window that a child can climb on and gain access to a window. If you find this information useful, don't keep us a secret! List us on any of your favorite networking / bookmarking sites